Say hello, again to the all new LAVATUBE Version 2 E-Cigarette! It's time to to take your vaping experience to the next level with a device tuned like no other! The all new LAVATUBE Version 2 is a specially designed variable voltage electronic cigarette that provides you with anywhere from 3 to 6 volts of vaping power with the easy click of a few buttons. Our team spent many months designing this device and there are many high tech features that separate the LAVATUBE Version 2 from the crowd. Here are the full set of specs:
Lightweight aluminum alloy body
Anodized aluminum finish
1 power / activation button
1 Voltage up button
1 Voltage down button
1 Bright blue LCD screen
1 510 threaded connection
1 Lanyard clip hole
2 vent holes
18650 battery compatibility
Selectable Voltage Range: 3v to 6v in 0.1v increments
Power / Activation Button: Click five times fast to power the device on / off; Hold the button down to activate.
+ Button: On press, increases voltage by .1 increments between 3volt and 6 volt. When you reach 6 volts, the user starts back at 3 volts
- Button: On press, decreases voltage by .1 increments between 3volt and 6 volt. When you reach 3 volts, the user starts back at 6 volts.
Regulated Output: Advanced pulse-width modulation power output with accurate voltage settings tuned to VRMS
Auto Shutoff: If the activation button is held down for 15 seconds or longer, the LAVATUBE Version 2 will shut itself off until the button is released to prevent overheating the atomizer and the device.
Short Circuit/Atomizer Protection: The LAVATUBE Version 2 can recognize an atomizer with too low of a resistance for the current voltage setting and will drop the voltage to 3.7v to protect both the battery and atomizer. If the atomizer is too low or shorted out it will shut off power to the device to protect the LAVATUBE Version 2 from being damaged.
Reverse Battery Protection: Protects the device in case you put the battery in the device backwards
Battery Monitoring/Over-Discharge Protection: The device will monitor the battery voltage and automatically display "LO" on the display and turn off when the battery is discharged, preventing damage to the battery and the device by overly depletion.
Battery Voltage Meter: The LAVATUBE Version 2 has a voltage meter built in, simply press and hold the - button for 5 seconds and it will display the voltage of the battery. This way you can monitor the power left in the battery before it needs to be recharged. 18650 batteries provide 4.2v at peak charge and over the life of the battery that voltage will decrease to about 3.2v level before needing to be recharged. This will help you monitor the life cycle of the battery.
Atomizer Ohm Meter: The LAVATUBE Version 2 has an atomizer ohm meter built in, simply press and hold the + button for 5 seconds and it will display the ohm's resistance of the atomizer that is connected to the device.
Amperage Limiting: 3 amps – The device should monitor and shut itself off if it detects any excessive over-current conditions.
Vent holes: 2 Vent holes on the bottom of the device for added safety
The LAVATUBE Version 2 unit will include a 1 Year Limited Warranty against any manufacturing defects from the date of purchase.
For a complete listing of written instructions for the Lavatube Version 2 Kit, please visit this forum link: